alışma dərəcəsi
About the product:
It is a nitrocellulose-based, air-drying, glossy topcoat.
Features:
It is a non-fading final layer of paint that adheres very well to the surfaces it is applied to, is resistant to physical and chemical effects.
Application:
It can be used in the furniture industry, on metal and wooden surfaces. New metal surfaces to be applied SAF CELLULOSIC GLOSSY PAINT must be primed with SAF CELLULOSIC PRIMER after cleaning all kinds of dirt, rust and oil. It is important to apply SAF CELLULOSIC FILLING VARNISH to get a proper surface after light sanding on wooden surfaces. After light sanding, SAF CELLULOSIC GLOSSY PAINT is mixed with SAF CELLULOSIC THINNER in a ratio of 1:1 until homogeneous, and applied with a gun in 2-3 layers at intervals of 20-30 minutes. multiplied by Tools should be cleaned with SAF CELLULOSIC THINNER immediately after use.
Drying time:
(at 25ºC/65% relative humidity): Touch dry: 30-40 minutes. Full drying 4-6 hours
Consumption:
10-12m2 area is painted with 1 liter of SAF CELLULOSIC GLOSSY PAINT if it is applied in a single layer in such a way as to create a dry layer of 30-35 microns.
Storage period:
2 years (in the unopened original box, in a cool place, protected from freezing and direct sunlight).
Storage conditions:
In ventilated warehouses, in closed packaging, in a dry and cool place. It should be protected from frost.
Warning:
R10 is flammable. R20/21/22/25/36 Harmful if smelled, swallowed, in contact with skin and eyes and if inhaled. R42/43 Harmful, may cause allergies by inhalation and in contact with skin.
Safety measures:
S 2 Keep out of the reach of children. S 3/7/9 Store in a cool and well-ventilated place with the box closed. S16 Do not smoke while applying the paint and keep the paint away from places where it could cause a fire. S 23/24/25/29 Do not inhale vapor. Avoid contact with eyes and skin. Do not flush down the drain. S 37/39 Use safety glasses and a mask when working. S 45/46 In case of accident or if you feel unwell, seek medical advice immediately and show the container or label. S 51 Should be used in well-ventilated conditions.
Product packaging:
15 lt.
Note:
The temperature of the surfaces to be applied should be between +150C and +350C. The temperature of the paint should not be less than +120C. When applied in a closed space, the humidity of the space should not be more than 65%.