alışma dərəcəsi
About the product:
It is a resin-based interior and exterior primer, modified with a polymer, used to increase the adhesion of the surface before gypsum and cement-based plasters to be applied on raw concrete. It is a pale red lining.
Thinning:
When applying with a roller, it is recommended to dilute it with a maximum of 1-2% pure water and apply it as a single layer.
Application:
The surface to be applied must be free of all kinds of dirt, rust and oils that prevent the adhesion of the product. Surface defects must be repaired. The surface must be dry and clean. Application: according to the desired consistency, it is mixed with water at 1-2% with a low-speed mixer and applied in a single layer on the surface with a roller. During application, SAF KONTAKT must be mixed at certain intervals. The surface must be completely dry before applying plaster and plaster. (about 24 hours)
Drying time:
(at 20ºC, 65% RH): Full drying time – 24 hours (drying time may be longer at higher humidity and lower temperatures)
Consumption:
Depending on the type, absorbency and structure of the surface to be applied, 1 kilogram can cover an average of 4 m2 in a single layer. A sample test can be done for exact consumption.
Storage period:
It can be stored for 18 months in its unopened box, in a cool and dry place, protected from frost and direct sunlight. Close the container tightly immediately after use.
Note:
Application temperature should be +5ºC TO +30ºC.
Safety measures:
S2: Keep away from children. S23: Do not inhale vapor. S24/25: Avoid contact with eyes and skin. S37: Use with suitable gloves. S46: If swallowed, seek medical advice immediately, show container or label.
Product packaging:
3.5 lt: 7.5 lt: 15 lt.