About the product:
It is a water-based product containing highly effective fungicides and biocides.
Fields of use:
This product is used on all wood products – wood veneers, DCP boards as well as mineral surfaces.
Instructions for use:
The surfaces on which the product is applied must be cleaned of oil, dirt and dust, polished if necessary.
Application:
It is necessary to apply the product twice on the surface with a brush, roller or sprayer without thinning. Wait 1-2 hours between coats.
Recommendations:
When using the product, the ambient temperature should be above +5°C and the air humidity should be below 80%.
Technical indicators:
Ingredients: Water-based
Density: 0.95-1 g/ml±0.05
Color: transparent
Drying time:
Initial drying: 1-3 hours
Full drying: 12-15 hours
Packaging: in 5 and 10 liter plastic cans
Consumption:
Two layers of 0.2-0.3 l/m² can be used.
Storage period:
It can be stored for 2 years at a temperature of 5-35°C, unopened and out of direct sunlight.
Warnings:
Protect the product from freezing;
Keep out of reach of children;
Store the product in a cool place, close the lid after use.
Warranty and technical support:
“Saf Chemical” Company guarantees compliance of the product with relevant technical conditions and state standards;
“Saf Chemical” Company is not responsible for the problems that may arise due to non-instructional use by other users, except for work performed under the guidance of the company’s specialists.